Is Verizon readying a family data plan? | Signal Strength – CNET News

Verizon shared data plans show up in employee training materials, still on track? | Engadget

Previous Coverage

Multiple wireless-broadband devices – could a MiFi, tethered smartphone or similar device be the answer?

Should mobile carriers charge a premium for tethering your mobile phone to your computer

My Comments

Verizon have started work on heading towards making shared / family data plans available to consumers and small-business owners who buy wireless-broadband service in their markets in the USA. They would appeal to people who run multiple devices that benefit from wireless-broadband service, such as the typical user who runs a smartphone and a tablet like an iPad. They will typically have a larger data allowance which is shared amongst the multiple devices in a similar way that voice-call minutes or text-message units are shared amongst mobile phones that are part of a family plan.

This may be offered as an alternative to tethering a laptop or tablet to a smartphone and may place their business model centred around the “tethering premiums” in jeopardy. But this can still lead to the goal of increased revenue per customer by them offering larger data allowances for the shared plans, especially as most of us buy data allowances in a way to provide some sort of “buffer” for usage peaks. But, for these plans to work well, they need to support sufficiently large allowances and allow a user to connect a maximum of between five to ten devices to the service; or 15-20 for a family / household plan. This can cater for different usage patterns including newer device classes such as cameras or vehicle infotainment systems with integrated wireless-broadband modems; as well as families that are very “switched-on” when it comes to technology.

The same “shared data plan” can be implemented by fixed-broadband Internet providers that implement data allowances in their business models like most of the ISPs serving the Australian market. Here, they could cater for users who maintain two or more Internet services like a service set up at their holiday house, city apartment or business premises as well as the service that is used at their main home. The service providers could then allow for a larger data allowance to be used between the locations with minimal allowance wastage due to underused locations. In some ways, it could allow those service providers who sell fixed and mobile Internet service, like most telcos to run service plans with larger aggregate data allowances that cover fixed and mobile use.

Any telecommunications carrier or Internet service provider who runs or intends to run a data-allowance model should then keep an eye on Verizon’s shared-data-plan model and assess whether to run it with their current business model. Similarly, the carriers could examine ways of taking this further with “virtual LANs” that exist across the devices on the same plan and consistent security / “clean-feed” parental-control parameters across all devices associated with an account.

You have a pair of good-sounding B&O, Bose or Sennheiser headphones but want to use them as a full-blown headset with your smartphone. You may also want to try them with your laptop or desktop computer when you are playing a game or using a softphone app like Skype.

The only solution would be to buy a wired or Bluetooth headset that connects to the computer or phone. But these would make your good headphones redundant. Therefore you would need to look for an audio adaptor with an integrated microphone so you benefit from full handsfree communication.

The only problem with a lot of the wired audio adaptors supplied by the phone manufacturers and third-party accessories suppliers is that you may not be sure that they will work properly with your phone. This is more so if you jump mobile platform every time the contract expires. Similarly, wired audio adaptors can be hard to find because the only device to be seen using with your mobile phone is a Bluetooth headset.

There is also a greater risk of failure with wired audio adaptors as they are used in that the wiring at the device plug can be easily damaged through regular use and storage, thus impairing the quality of phone calls with these devices as I have experienced.

The Nokia BH-111 Bluetooth Audio Adaptor itself

Nokia BH-111 Bluetooth headset adaptor fob - same size as SD card

But wait, I have come across the Nokia BH-111 Bluetooth Audio Adaptor which connects to a set of regular headphones, comverting them in to a Bluetooth stereo headset. It comes with a set of in-ear earphones but these may come in handy as “emergency spares” or for compact-use requirements. It is available in three different colours – black, white and a “hot-pink” colour and retails for AUD$50, making it fit within gift-pricing range.

This kit is centred around a small fob that houses a microphone, control buttons, rechargeable battery and Bluetooth transceiver. You can connect the supplied earphones or a pair of headphones to a 3.5mm stereo jack on the end of the fob’s “hinge pin” and this fob can clip on one’s shirt or tie like a lapel microphone.

Bluetooth headphone adapotr fob with headphone jack facing you

The operation buttons are each edge of the face of the fob, with one “multifunction” button that is used primarily to make or take calls, a previous-track button, a next-track button and a play-pause button that can mute the microphone during calls as well as start and stop the music. The hinge pin on this fob has a knob for adjusting the sound volume opposite to where the headphones are plugged in to.

When you charge this Bluetooth audio adaptor, you plug the supplied battery charger or a USB-2.5mm DC cord in to the side of the “hinge pin”; and it doesn’t take long to charge this adaptor.

The Nokia BH-111 complies to the following Bluetooth device classes: Hands-Free Profile, Headset Profile, A2DP audio playback profile and AVRCP audio controller profile. It can store pairings for up to five physical devices at a time and can only connect to one Hands-free or Headset Profile device and one A2DP / AVRCP audio-player device at a time. This could allow you to work it with a Bluetooth smartphone and a separate Bluetooth-capable MP3 player at the same time.

Now these good headphones work as a stereo Bluetooth headset for your smartphone

The clip can be very stiff and hard to attach to a thick tie or suit coat but can work with most shirts. But it doesn’t look like something that could break easily after regular usage.

Setup and Usage

You have to use the “multifunction” button to turn the unit on and off as well as make it open for pairing. Here, you have to turn the audio adaptor off, then hold the multifunction button down until you hear a five-beep sequence, followed by a silence then a distinct beep. Then you start your device in “Bluetooth-device-scan” mode and it will show up as “Nokia BH-111” on the device’s user interface.

On the other hand, you hold the multifunction button down until you hear the five-beep sequence complete, then release this button in order to turn the audio adaptor on.

The Nokia BH-111 can act in a very confused manner if two or more devices that are paired with it are in the vicinity. This can happen more so if it is still connected to a mobile phone while a computer associated with it is nearby.

When the phone rings, you hear the Nokia ringtone rather than your handset’s ringtone, which can be confusing when you take a call through the audio adaptor for the first time and your phone plays its own ringtone through its speaker. I would rather that the phone’s ringtone plays through the headphones when a call comes in.

Battery Runtime and Sound Quality

For battery life, the Nokia BH-111 audio adaptor can complete a day of music-playback use with a Bluetooth mobile phone and longer in a quiescent state. It works properly and clearly when making and taking calls – the caller can hear and understand my voice properly and I can hear their properly as if I was using the phone handheld. I noticed this more with quieter environments but the intelligibility for the sound degrades if I was in a noisier environment.

The audio quality for music playback doesn’t change from what is offered by a wired connection to the phone, although there may be jitter occurring if the phone is “overloaded” with other tasks.

Limitations and Points Of Improvement

The clip could be improved on with a lever-type action similar to a clothes peg so it can easily clip to thicker material such as winter clothing or formal wear. The functions could also be marked in a colour inverse to the finish so it is easier to discover them.

It could be beneficial for a device like the Nokia BH-111 to have a 3.5mm input jack so you can connect other personal-audio devices to this adaptor, with the call audio from the Bluetooth phone cutting over sound from the connected personal-audio device. This could benefit people who use a high-capacity iPod Classic or similar device as their music library, listen to broadcast content from a personal radio or play content on legacy formats like cassettes or CDs using a device like a Walkman or Discman.

Similarly I would like to see a function that allows the audio adaptor to work as a speakerphone when connected to other audio equipment that uses speakers rather than a set of headphones. This may appeal to those of us who want to connect it to a car sound system via the AUX-IN jack or cassette adaptor for cassette-based equipment and use Blu-Tack to secure the fob to the dashboard for a high-quality reliable Bluetooth handsfree / music-player setup in a borrowed or hired vehicle.

An improved unit could implement a microphone array as a way of focusing the sound on the user’s voice in a phone conversation, and could place this leagues ahead of the typical Bluetooth headset.

Conclusion

The Nokia BH-111 headphone adaptor is infact the first product of its kind on the market that permits one to use their favourite headphones as a reliable calls-and-music Bluetooth headset for their smartphone especially if they use it for more than just phone calls.

Asustek to showcase swivel-screen notebook at 2012 Computex | DigiTimes

Un ultrabook convertible chez Asus ? | Le Journal Du Geek (France – French language)

My Comments

A question that many people will be pondering nowadays when they consider a secondary computing device is whether to get a small laptop computer like a netbook or Ultrabook or a tablet computer like the iPad along with an accessory keyboard. There will be the tradeoffs of each platform such as software availability and user-interface requirements.

This will become more so when Windows 8 with its Metro touch user interface being part of the operating system and becoming another full-bore competition to the Apple iOS platform.

But ASUS have answered with an Ultrabook that can bridge between the notebook / laptop and tablet form factors in the cost-effective and power-efficient way that has been required of the Ultrabook. This machine will be the first “convertible” Ultrabook that has the “swivel-head” screen design like what I have experienced with the Fujitsu TH550M convertible notebook.

This will work tightly with the integrated touchscreen interface that Windows 8 provides rather than the previous practice where the manufacturers fabricated their own touch-optimised shell for these computers.

The ASUS convertible Ultrabook could offer a tablet-style user interface for casual computing needs yet have the full proper keyboard that would appeal to us when working on emails or documents; yet it will have the benefits that tablets like the iPad offer like quick start-up and long battery runtimes.

The main question is that whether other manufacturers would make the convertible Ultrabook form factor and make these computers cost-effective and widely available or will they be taken in by just supplying tablets as a distinct touchscreen product class?

Renault debuts R-Link, an in-dash Android system with app market — Engadget

My Comments

The Android operating system isn’t just in your hands anymore with a tablet or smartphone. Renault has made sure it will be in the dashboard of the car, together with an app store to back the concept.

There is a main questions that I have about the concept at the moment. One is whether the system will use an updatable wireless-broadband link or a Wi-Fi network or both for data transfer to and from the network?

But what I see of the idea is the main use of the apps for driver and passenger entertainment, in the form of DLNA-based synchronisation of media with the home network, Internet radio (vTuner and similar Internet-radio directories, Last.FM, Pandora, etc) and similar applications. But there are other app ideas like advanced navigation including “book-ahead” functionality and roadside-telematics integration, and car statistics monitoring.

There could even be the ideas of using this Android platform to integrate the vehicle with home automation. The most obvious scenario that would come to mind would be looking at the dashboard to know whether the garage door that should be closed is infact closed and then touch a button to close it. This could avoid the need to look at the rear-view mirror as you drive out to check on the garage.

At least this effort by Renault with the Android platform could become a platform for developing in-vehicle infotainment and telematics systems and applications.

One of the main advantages of these devices is that you can use them to check on your email and send simple email messages or replies. But you need to set up your email to work with these devices before you can use this benefit.

What you need to know

You will need to know the following details:

• what kind of email setup you are using
  This could be your the name of your Web-based email service or one of the following kinds of client-driven email services (POP3 / SMTP – common in email services with residential Internet services, IMAP – used as a client-side access method for some Web services or an alternative to POP3 for some residential and small-business services and Microsoft Exchange – used in most larger business setups)
• your full email address 
• your password for that email service. For email services that are part of your Internet service, this will be the same as your login parameters for that email service.

POP3 (SMTP) email services

If you are using a POP3 email service, which most consumer and small-business email services are, you will need to go to the email client on your regular computer and make sure the option to “Keep messages on server” is selected. If you regularly work your email from your regular computer as well as your smartphone or tablet, you could set the option to clear messages from the server after a month.

Setting up the smartphone or tablet

You will need to open your email app on the smartphone or tablet and go to “Account” options. In the Android platform, this would be “Email” whereas the iOS devices would know it as “Mail” on the iPhone and iPad.

Touch the “Add Account” function and enter your email address and password. In the case of the Apple devices, you will have an option with the graphics that represent the Web mail services and Exchange service as well as an option for an “other” service. Android users would have to use the Gmail app to work their Gmail account. Where prompted, enter your full email address and password. At that point, enter your name in the “Name” field if you are setting up your Apple device.

Here, the smartphone or tablet will obtain the setup details for your email account and set itself up for that account if you entered in the correct email address and password. This is where Android users would be asked to enter their name, which will appear on the email others receive from them.

If you maintain multiple accounts, you can add these accounts to your device so you can monitor them. This is done using the same procedure.

I would still make sure that any taglines like “Sent from iPhone” or “Sent from Samsung smartphone” are kept so your recipients know that you were replying or sending that message from the smartphone. This may be of concern for people getting used to the touchscreen keyboard on these devices.

Your email application

Android users will find that the arrival of new email is marked by an “envelope” on the top of the screen. They then “draw down” the “blind” which shows a notification screen with any notifications still outstanding. Touch on the “new email” notification so you can see all the new mail that has arrived. As well, the email application will be visible on the first home-screen or the first screen of the “Applications” library screen.

For iOS users will see the email application always at the bottom of the screen alongside the phone application. This will have a red bubble indicating the number of new emails that have arrived.

Tips

What POP3 users need to know

People who use POP3 email services and want to keep a record of an email that they sent may need to send a BCC (blind carbon copy) to themselves of the message because the old POP3 protocol doesn’t allow for proper multi-terminal access to these accounts with a synchronous view.

Similarly, an email that is marked as read or deleted on your smartphone may not be marked as read or deleted on your regular computer and vice versa. This is also to do with the same “single-computer” mentality around this protocol.

Setting your phone up for your Wi-Fi network

It is also a good idea to set your phone or tablet up with your home’s or small-business’s Wi-Fi network so you can make use of the better wireline broadband access plans rather than relying totally on your 3G provider’s tight wireless-broadband tariffs for your email.

Conclusion

Once you have your email set up on your smartphone or tablet device, you can find yourself liberated from your desk when it comes to checking on the arrival of important email.

Samsung tablet ban lifted | The Age IT (Australia)

My Comments

This latest development is part of the patent war taking place concerning mobile devices, with this round of legal action by Apple against Samsung being more of a “patent on style”. Here, the goal of the Apple lawsuit was to prevent the sale of the Samsung Galaxy tablets and smartphones because they were seen as valid competition to the iPhone and iPad and it has been known that Apple aren’t keen on licensing their patent portfolio to others.

Now the Full Federal Court in Australia overturned an injunction prohibiting the sale of the Galaxy Tab series of tablet devices in in that country; as long as the sales were accounted for. But Apple intends to go to the High Court to maintain an injunction against further sale of these devices

While the initial Federal Court injunction was in place, there were attempts to parallel-import the devices in to Australia but these were met with threatening letters from Apple’s legal team. This is even though it was feasible for people to buy or have others buy the Galaxy Tab devices in other countries that don’t have an injunction in place against them, then bringing them in or having them posted or shipped in to Australia.

This case may have the soundings of similar action that Apple took concerning GUIs and the Macintosh, with it being resolved in a more competitive manner thus allowing for a level playing field.

Ericsson’s proof-of-concept solution for DLNA in the hotel room (PDF)

An example of a hotel or serviced apartment block which would be relevant to DLNA

My comments

Why DLNA in the hotel room?

Increased availability of affordable DLNA-compliant entertainment equipment

Most manufacturers who sell consumer electronics are offering electronic entertainment devices that can be connected to a home network and can pull down content from that network or the Internet. When it comes to obtaining media from the home network, these manufacturers will use the established UPnP AV / DLNA technology rather than reinvent the wheel. This feature is being promoted as a distinct product differentiator and will soon end up being offered across all of a manufacturer’s lineup except, perhaps, the very-low-end models.

Some of this equipment is available in form factors that would suit the typical hotel room, suite or serviced apartment. Examples of this include the Sony CMT-MX750Ni / CMT-MX700Ni and the Rotel RCX-1500 music systems that I have reviewed on this site as well as the increasing number of “smart TVs” offered by LG, Samsung, Panasonic and Sony. In the same context, a DLNA-compliant network media adaptor could displace a solution-specific option as the gateway to premium content in the hotel as has been investigated for residential cable TV.

Sony CMT-MX750Ni - an example of a DLNA-compliant music system for a hotel room or serviced apartment

In the case of some of the network media adaptors and “smart TVs”, it could be feasible to integrate site-specific apps or Web links to facilitate interactive services like room-service ordering or in-room checkout that have been part of hotel-based video systems.

Access to online content through mobile computing devices

Most people are making use of online content services like Internet radio, Last.fm, YouTube and Netflix on the mobile computing devices that they take with them all around the world. This also includes use of the Social Web where Facebook and Twitter profiles and pages are replete with photo and video content hosted or referred to by the profile’s / page’s owners.

Multimedia content held on users’ mobile computing devices

Another fact is that guests want to be able to bring their own content. Examples of this include music that is held on a smartphone or reviewing just-taken digital images or footage held on a digital camera or laptop on the large-screen TV.

Acer Iconia Tab A500 - an Android example of a platform tablet computer

This is being taken further by the fact that platform smartphones and tablets have DLNA controller abilities either with them or as a low-cost or free app; and that mid-range and premium cameras will be equipped with Wi-Fi and “show-on-DLNA” functionality as a product differentiator.

This concept can allow better use of site-specific media like the pay-per-view movies. For example, a movie that is started on the lounge TV in a suite or apartment could be completed on the bedroom TV or a guest could view one of those pay-per-view movies on their iPad or similar tablet.

Personally I also see this concept as part of the desire by the hospitality sector that your hotel room or apartment is your home away from home.

Requirements Of This Setup

Different Media Pools

There are three different media pools that one has to consider when implementing DLNA technology in the hotel environment.

“Own media pool”

This represents the media files that are owned and maintained by the guests. They would be held on secondary storage in a portable computer, mobile device or camera or held on a network-attached-storage device.

Examples of these include music and image collections held on a notebook computer or just-taken digital images and movies held on a camera, camcorder or mobile phone. This could encompass content that is offloaded to a compact NAS device like Thecus’s N0204 “pocket rocket” NAS.

Property-local media pool

This media pool represents all media available to the guests courtesy of the hotel. It would typically be held on servers located within the property and the most obvious application would be those pay-per-view movies that guests can buy and view on their room’s TV.

But it can encompass any “broadcast-to-network” feeds used for distributing regular, cable or satellite TV through the building via the LAN or line-level media feeds used to pipe audio or video content from cabarets, conference suites or similar locations around the hotel.

Global media pool

The global media pool is representative of media that is owned by third parties and held on servers accessible to the hotel via Internet. The guest would simply select the content from the service provider and have it appear on their TV.

Examples of this would include IPTV services; Internet radio; online-media services like catch-up TV,YouTube or Netflix; the Social Web or cloud-driven remote access to one’s home media pool like Skifta.

A distinct logical realm of control

The room or apartment where the guest stays has to be seen as a distinct realm of control for the guest. This also includes situations where two or more rooms or apartments are hired by the one guest to be used effectively as one room, such as the common “connecting rooms” setup.

This means that the guests have to be able to push the media they want to view to any of the DLNA-compliant devices in their room, whether they bring the devices themselves or use the hotel-supplied devices. It also means that they have access to all of the content they can use, whether it’s the media on their laptop, the pay-per-view movies in the hotel or content on their Netflix or YouTube subscription.

But they can’t push the content to neighbouring guests’ TVs without invitation nor can they gain access to content pools they aren’t normally entitled to.

Ericsson’s proof-of-concept solution

This is a “proof-of-concept” setup that works on the assumption that there is no Wi-Fi Internet service in the premises and the mobile device is using wireless-broadband i.e. a 3G data plan for its Internet.

The hotel will need computer equipment on its network that performs the following functions: a Residential Gateway which links the hotel network to the Internet; and a Residential Control Device which controls access to DLNA devices in the guest rooms or apartments.

The guest’s smartphone will need a handler app which is part of the process of establishing the relationship between the mobile devices and the room devices and is performed whether the Internet connection is via Wi-Fi or wireless broadband. This app maps the DLNA equipment in the hotel room to the “global media pool” available through the online media service based on a unique identifier which is generated when the guest checks in for their hotel stay.

This identifier could be obtained by the handler app through a QR or similar code that is shown on the room’s TV screen when the guest enters the room; or printed on the room keycard that the reception staff hand to the guest. A phone capable of working with near-field-communication setups could obtain the identifier through this path, again at checkin or when the guest lets themselves in to their room if the room lock uses NFC technology; such as some of the newer VingCard RFID setups.

Then the handler would list out the DLNA devices in that room as “content sinks” for the guest to enjoy their content on.

Missing Factors

In-house public Wi-Fi

There is a missing factor with the Ericsson proof-of-concept setup. Here, most hotels will want to provide Wi-Fi Internet service as a value-added or extra-cost amenity. As well, all smartphones and tablet computers have integrated Wi-Fi wireless functionality.

The typical way of provisioning Wi-Fi in the hospitality industry is to implement a site-wide public Wi-Fi extended-service-set covering the whole of the building. As well, if the public Wi-Fi network is properly setup, there isn’t the ability to link data between the Wi-Fi-enabled computing devices, so as to assure privacy and security for each computer user. I have raised on this site the idea of evolving this secure-network setup further to allow clusters of device

There hasn’t been work done on the idea of implementing a room-unique or guest-unique network setup for the hotel industry. This is although some hotels were trying out the use of “MiFi” routers to provide guest-unique network setups, which I learnt of in an article in the HotelChatter blog; as well as the many Wi-Fi routers that I had seen set up at the Australian Audio & AV Show in the Melbourne Marriott Hotel in order to provide DLNA media networks for demonstrating network-driven music distribution.

Access to local media

Another missing factor is the ability to provide held in the guest’s own media pool to the room’s DLNA ecosystem. Here, we may want access to the media held on our devices, whether it is music held on a smartphone, videos held on a tablet or just-taken images held on our Ultrabook.

Here, there wasn’t any question about gaining access to media held on these devices via the hotel’s public-access network infrastructure either through “pull” (access through DLNA playback device’s controls) or “push” (source device’s control app) methods.

Multiple rooms

The last factor that wasn’t considered is the desire to pass media between rooms of a cluster such as guestrooms hired by a family or a conference room hired by a business alongside the guestrooms for the conference guests as part of a “block booking”.

These multi-room bookings may provide for arrangements like allowing users to shift the content to other rooms under limited circumstances. Similarly, it could be feasible to have content held on one device in one room viewable on devices in other rooms used by the group.

On the other hand, it would be desireable to prevent content being push-played by one group member to the room of another group member as a way to assure privacy and security for that member.

This situation can be catered for using the Residential Control Device software by allowing bridging between the unique IDs under certain circumstances.

What would be essential for successful DLNA setups in the hotel sector

Local logical network serving one or more physical networks

Here, you would need to create a local subnet (logical network) for each room / apartment or cluster or rooms. The physical Wi-Fi networks that are part of this local subnet would need to work with a unique SSID and stay-unique Primary Shared Key for their security. They would be served by a local Wi-Fi router that would be managed by the hotel’s “back end” software.

This software would bootstrap the router so that it is set up to the guest’s needs and allow guest-supplied equipment to simply and securely enter the subnet, linking it to the Internet and the hotel-supplied DLNA equipment. This would be set up with NFC or QR-Code technology or WPS-PBC setup when the guest enters their room.

Upon checkout, this router would be set up to a “ground-zero” mode which doesn’t provide casual access to the Internet or the DLNA devices until another guest subsequently checks in.

A consistent connection and discovery experience

When you connect your computer equipment to this network, the discovery experience for DLNA-compliant equipment must be the same as for when you use your computer at home.

The local logical network can make this feasible by exposing only the DLNA-compliant AV equipment that exists within the guest room / apartment at the exclusion of equipment and computers in neighbouring rooms. Yet the content-discovery experience is what would be expected for the class of equipment. This includes the use of control points to “push” content to playback devices.

IPv6 – a main facilitator

A major facilitator for this setup would be the use of IPv6 networks. The address pool offered by this standard is much bigger than the address pool offered by the legacy IPv4 technology and there is inherent support for secure tunnels between logical networks.

In this application, an IPv6 setup can comfortably create local logical networks for each and every guest room in a large Vegas-class resort or downtown (central business district) hotel. There is no need to implement network-address-translation to permit the local logical networks and the back-end systems aren’t destabilised. There is the ability for IPv6 routers to create v6-v4 links to legacy IPv4 devices which represent most DLNA media playback devices and this has to be supported and functioning properly in these devices.

Conclusion

What needs to happen to facilitate the concept of DLNA-based media management in the hotel environment is for further research and study to take place. Here, it would need to be based on technologies that are currently available to the hotelier and potential guests, such as in-house public Wi-Fi networks and near-field communications.

The functionality could also be implemented in network-infrastructure equipment through the use of software that is deployed to the equipment while it is in use, rather than through replacing or adding new hardware. Any DLNA-enablement setup should not preclude the use of media devices that are available to the consumer marketplace.

Bluetooth SIG – "Bluetooth Smart"

My Comments

Bluetooth 4.0 Low Power technology, formerly known as Wibree technology has been put on the market this year. This technology is pitched more for “sensor/controller” devices that primarily provide data to another device; and are required to run for a long time on two AA batteries or a “button-style” battery. Examples of these devices include watches, heart-rate monitors, shoe-attached pedometers, door-window security sensors and the like.

These devices are being marketed as Bluetooth Smart devices and Bluetooth terminals like smartphones and computers that can work with these devices are marketed as Bluetooth Smart Ready devices.

A Bluetooth Smart device like the heart-rate monitor or door security sensor has to be compliant to Bluetooth 4.0 Low Power as a single-mode device and support GATT functionality. These devices cannot work with legacy Bluetooth devices that don’t support this standard.

Bluetooth Smart Ready is used to describe a Bluetooth device, typically a “hub” device like a computer or smartphone that works with these Bluetooth Smart devices. The Bluetooth Smart Ready device must have Bluetooth 4.0 enablement with GATT support. It also has to have a dual-mode low-energy Bluetooth transceiver and updatable software. This would typically benefit regular and mobile/embedded computing devices that work to a “platform” like Windows, MacOS X, iOS or Android. These devices can connect to the Bluetooth Smart devices as well as regular Bluetooth devices.

At the moment Apple has the Smart Ready devices  in the form of the iPhone 4S and the latest iterations of the MacBook AIr and Mac Mini computers. But this technology will be rolled out in to newer computers and Bluetooth modules. The Bluetooth Smart technology will be a point of innovation as companies develop the sensor devices and software for this newer hardware platform.

I would also see this as an improvement for Bluetooth keyboards, mice and controllers due to the idea of having these devices run on a pair of AA batteries that assure reliable operation for a long time without needing to be charged frequently.

It will open up the Bluetooth universe to a larger collection of devices, services and applications that most of us wouldn’t have thought of.

There are times when you want to upload or download files from your network-attached storage device using your smartphone or tablet computer. Examples of this include offloading files from a low-capacity device, through making media that you took or acquired through your device available at all times from your DLNA-equipped NAS to simply backing up data held on your device.

Of course, you may simply treat that NAS simply as a network transfer point for your data. Examples of this may include working with documents that you start on an iPad and want to complete on your regular computer or conceptual “rough-shot” pictures that you take you your phone’s camera and want to work with further using Photoshop and other software on your computer.

How is it done

But how am I able to do this with my network-attached storage and my mobile devices? Some network-attached storage devices may use a Web front for the file collections where as others may implement certain extensions to DLNA for uploading and downloading some media files. This latter situation is infact a long-term goal for the DLNA Home Media Network, especially when it comes to shifting or syncing multimedia files like music or images.

These environments don’t necessarily provide a consistent or ideal user experience for the mobile device user. This can typically be due to a Web front that is optimised for desktop use only to DLNA server and client apps not offering the proper sync or file-transfer functionality.

SMB file-manager apps

The preferred method that I would use is SMB/CIFS network file handling which every network-attached storage device supports thanks to Linux’s SAMBA software. Even the USB-linked file servers that are an increasing part of high-end routers like the Freebox units do support SMB as well as the Internet HTTP and FTP file transfer protocols. This has been a standard for regular computing devices with the Microsoft Windows Platform since Windows For Workgroups 3.11, then was exposed to Linux regular computers through SAMBA and has been exposed to the Apple Macintosh platform since MacOS X.

The platform-based mobile devices now can join the SMB party through the use of SMB-enabled file-manager apps. These are typically low-cost or free apps that expose the mobile device’s file system and the SMB file shares (entry points) made available by computers or network-attached storages. Some of them have file-viewer functionality for file types not supported by your device’s file handlers.

iOS

Intuitive Commander (App Store – $0.99)

FileBrowser (App Store – $4.49)

Syncsellence (App Store – $5.49, free limited version App Store)

Android

ES File Explorer – I use this on my phone (Android Market)

File Expert (Android Market)

File Manager (Android Market) / File Manager HD (Android Market) – Rhythm Software

Blackberry

File Expert (Blackberry App World – US$1.99)

File Manager Pro (Blackberry App World – US$4.99) – Terra Mobility

ArrangeIt File Manager (Blackberry App World – US$1.99) – Conceptual Designs

The various app stores for the popular mobile-device platforms will list more of the file manager apps with SMB file transfer and you can find them using the terms “SMB file transfer” in your search query.

It is also worth noting that your NAS’s vendor may offer file-transfer apps for their device on the iOS and/or Android platforms so you can transfer the files to their device. These programs may also work with the remote-access functionality that some of the consumer and SMB NAS units provide, thus keeping login credentials for the devices and streamlining the remote-access experience.

Other issues worth highlighting

iTunes-purchased content

You may have problems copying content that you purchased with iTunes on your iPhone or iPad directly to the NAS due to Apple’s setup for these devices. But they have improved the iTunes and iOS setup to allow a user to download the purchased content to an instance of iTunes run on a regular computer even though they purchased it on the iOS device. This works best if the regular computer’s iTunes library is referencing the NAS in question.

People who use iOS platform devices that aren’t updated to iOS 5 will need to tether the device to their iTunes-enabled regular computer. Then they will need to use the “Transfer Purchased Content” option in iTunes to copy the content they bought on the device to the regular computer or NAS.

It will also be important to make sure that audio content is downloaded as MP3 files rather than protected M4A files.

One way that Apple can work this situation out better is to implement read-write ability to iTunes (DAAP) servers for the iPod media-management app in their iOS platform. Here, the software could then support improved “offload” functionality. This may not come about due to Apple’s investment in and their fanbois’ preference for the iCloud as a large-capacity storage service.  But practically-minded Apple enthusiasts could place more value on a NAS as an extra-capacity data store so they know where their iTunes content is all the time.

File-transfer operating conditions

When you transfer files between your mobile devices and the NAS, make sure that you have a strong Wi-Fi signal at your mobile device and that the device has sufficient battery strength. This could be achieved through having the device connected to its charger while the transfer goes ahead.

NAS setup conditions

If you are transferring media files to the NAS, you would need to transfer them to the media folders that are referenced by the media-server software on that device. This may be made easier by using the file manager software’s “bookmark” or “favourites” options to point to the start of the NAS’s media folder tree.

It is also worth keeping other personal and workgroup shares on the NAS simply for backup or transfer purposes and referencing these with your file-manager app.

Conclusion

Once you are able to know that you can use the SMB file transfer method for moving data between your NAS, tablet and smartphone, you can see more value out of these mobile-computing devices.

Apple iOS 5 review: Modest, but definitely worthwhile | iPhone Atlas – CNET Reviews

From the horse’s mouth

Apple – iOS 5

Previous coverage in HomeNetworking01.info

Apple iOS 5 to be updated without the need to tether your device

My Comments

Now the iOS 5 has been released, it will offer some major benefits for your iPhone or iPad. You will have to tether your iPhone, iPod Touch or iPad to your computer to update it to the new version but this will be the last time you need to tether the device according to Apple.

Here, you will have the operating-system updates able to be downloaded over the air using the same method as what is used for delivering and updating the apps for your device. Newly-deployed iOS devices will not need a computer to be present as part of their setup process anymore.

As well, if your iDevice is charging and the computer that hosts your device’s parent iTunes collection is on, the device will be synced over the home network. This is something that has been offered by competing mobile platforms with their desktop software.

There are some benefits like improved operation for some of the integrated apps. This also includes a “notifications” screen similar to what Android users have had; as well as an integrated Twitter client. Of course it supports an iP messaging service that works between Apple iOS devices and I am not sure if there are clients for the desktop operating systems.

As well, I detailed on a speech-driven agent app called Siri which interacts with the iOS 5 devices by responding to your spoken requests. This function has been promoted in relation to the iPhone 4S smartphone.

There are a few functions that the competing mobile platforms still have an advantage over the Apple iOS platform. One is the provision of always-displayed screen items that programmatically change or act as a user interface to a program. These are in the form of “widgets” and “live wallpaper” in the Android platform and “tiles” in the Windows Phone 7 platform; and could show running data like time, weather or stock-market data. The Apple platform only allows apps to attach a “bubble” to their screen icon that can show a number or a “traffic-light” colour to show certain events; and this has severe limitations. For example, you can’t control or monitor multiple devices or functions using a single monitor app. This could be something that could be rolled out in a subsequent major update for the iOS platform.

At least this operating system will be a major break for your iOS device by offering it a lot more.

HP Envy 100 all-in-one printer - you can print to these printers from your smartphone or tablet

Most smartphone or tablet users would like to obtain hard copy of documents or pictures on paper. But at the moment, there is no open and common platform for printing from these devices.

There isn’t even the ability to connect a printer directly to any of these devices and this issue will become more real as more households use these devices. It will extend to other Internet-ended devices like Internet-ended TVs and set-top boxes that are part of interactive TV setups.

There are a few solutions being established by most of the printer manufacturers and all of these solutions require that you use a newer network-enabled printer that is connected to your home network.

Manufacturer-supplied print app

Brother iPrint&Scan - one of the mobile print apps offered by the manufacturers

The most common solution is to download a printing app from the mobile device’s app store. This method can work if your preferred printer brand is other than Hewlett-Packard because this brand offers different print options that don’t rely on these apps. As well I have installed these apps on to my Android smartphone so I can assess different network printers’ abilities with printing from a smartphone.

These are written by the vendors themselves, usually for all of their recent-issue network-enabled printers and they can print known file types like image files, PDFs or, in some cases, common office file formats. It is also worth knowing that most of these apps allow you to scan photos or documents to your mobile device using your multifunction printer’s scanning facility.

Typically these programs register with the device’s operating system as a file-handler for the file types that they can print. Then, when you open one of these files in the operating system, you have the option to open the file with the printer app; which will list the printers on your network that it has discovered and knows it can work with. Subsequently you select the options that suit your needs, such as paper size or duplex printing, and start the print run.

Apple AirPrint

This works with all Apple iOS devices that are up-to-date with a version of iOS 4.2 or newer. At the moment, it only works with HP ePrint-enabled printers and provides a similar print-job experience as what would be expected for desktop printing.

Apple has yet to release this feature to other printer manufacturers so that people can have a choice of printer to work from.

Google Cloud Print

Google is offering a smartphone printing solution known as Google Cloud Print. This solution, which is immature at the time of writing, requires the use of an HP ePrint-capable printer or certain network-enabled Kodak printers for PC-free network printing. Other printers will require a desktop computer to be running a helper application to collect and forward print jobs to that printer.

At the moment, it works in a similar manner to the printer-manufacturer-supplied app setups where the user has to use the app to print out documents. There is a larger choice of applications as shown on this page for mostly the Android and iOS platforms.

Email-to-print

I have covered HP’s ePrint “print-by-email” setup through the review of a handful of ePrint-enabled HP printers. Here, the printer and the smartphone or tablet must see an Internet service for this to work.

As well the printer has to be registered with the HP ePrint service by its owner. Users would have to then send the image, PDF or document file to a special email address that has been determined as part of the printer setup routine. There is the ability to set up a white-list of approved email addresses that can send print jobs to the printer and recently HP enabled the ability for users to determine an easy-to-remember email-to-print address for their printer.

Kodak offers a similar function for some of their network-enabled printers at the moment. But none of the other popular printer manufacturers have established an email-to-print infrastructure that can work with any smartphone or tablet device.

Achieving best results from your mobile-device print setup

An issue that may plague smartphone or tablet users when they print using one of the mobile print solutions, especially the manufacturer-supplied print apps or the Apple AirPrint setup is that the job may be interrupted midway or take an inordinate time to print. It may not be of concern for Google Cloud Print or email-to-print setups because the job would be lodged with an Internet-based server which would resubmit it to the printer.

This can happen if the mobile device isn’t communicating properly with the Wi-Fi network such as through low batteries or being used in an area where there is poor reception. In most cases, it would be a good idea to make sure the battery is charged up or the device is plugged in to its charger; and you are seeing at least three or four bars on the Wi-Fi signal-strength indicator when you are running the print job. This may require you to avoid moving the device around until the print job is complete, which will be indicated on the software.

What can be done

What I would like to see for on-site printing from mobile devices is the use of the UPnP print device classes which I have touched on previously. As well, more printer manufacturers could license or exploit the email-to-print setups that HP and Kodak have established.

As I have said previously, the network printers should also have a larger memory so that  print jobs can be transferred from the client device and held in the printer’s memory until the last page is turned out.

Conclusion

At the moment there isn’t a clear path for setting up a printing solution for your smartphone, tablet computer or similar device that doesn’t need a desktop computer to be available at all times. It all depends on which make and model of printer you are using on your network and, in some cases, what platform you are using for your device.

ScoreMobile scoreboard app

If you look in your mobile platform’s app store, there are quite a few sports apps which turn your smartphone or tablet in to a scoreboard or leaderboard for your favourite sporting events. Some of the scoreboard apps allow you to monitor a particular team’s games, view league ladders or see on-demand video of game highlights. Examples of these include the ScoreMobile apps; and the “Footy Now” / “League Now” apps for the AFL and NRL football leagues respectively; all of which are available on most of the main mobile platforms like iOS and Android.

Most of these apps are free or advertiser-funded and are written in conjunction with companies and other interests associated with the particular leagues or codes that these apps work with  As well, they work via whatever Internet connection your device is using at the moment, whether it’s the Wi-Fi home network, the Wi-Fi hotspot at your favourite bar or the wireless broadband service that you device is associated with. But are they a useful download for your phone or tablet?

I would say that they provide a useful role for any sports followers, whether they watch the game on TV at home or their favourite bar or cafe; or go to the stadium to watch the game.

Footy Now AFL scoreboard app

One key use for people who watch the game in a public place such as the stadium, a large outdoor screen in a square or a packed-out bar, is to have a “handheld scoreboard” that they can glance at  Here, they may not see the scoreboard easily due to them being in the wrong seating position or being further back from the venue’s TV screen.

At home, you could be outside listening to the radio commentary yet be able to check the scores at a glance. This may then be useful for knowing whether to head inside to see the action on TV. For Australian readers, this could extend to you having a tablet computer showing the scores for the AFL or NRL Grand Final near the barbecue while you are cooking the meat for the Grand Final lunch.

These apps would also appeal to travellers and expats who like to follow their favourite matches while they are travelling. An example of this was a friend I know who had used one of these apps on his iPhone to follow a baseball game that was taking place in the US while he was over here in Australia. Similarly a Manchester United fan could follow that soccer team’s performance anywhere around the world even if there isn’t a TV broadcast of the games where they are.

League Now NRL scoreboard app

For these apps to work properly, they need to have proper support for push notification but without placing too much strain on the device’s battery runtime. As well, these apps need to be able to work in a manner that doesn’t take over the processor power of these devices when they are just showing scores. As well, the data backend has to be synchronous to the scoreboard at the actual game in the same manner as what is expected for the TV scoreboard – a football goal appears on the mobile scoreboard app as soon as the pitch umpire declares that goal.

So whether you are an avid sports follower or just casually watch some sporting events like football finals or Grand-Prix car races, the mobile scoreboard apps do have a place on the smartphone and tablet devices.

The iPad gets a Facebook app, finally | Engadget

The Official Facebook App for iPad Is Finally Here | Gizmodo

Facebook Finally Launches Its Own IPad Application | AllFacebook.com

Facebook unveils iPad app, new mobile platform for developers | SmartCompany (Australia)

From the horse’s mouth

Introducing Facebook For iPad

Download link

iTunes App Store

My Comments

Previously, I posted an article on the idea of creating and implementing desktop and tablet-computer client programs for popular social-network services. Here I raised issues of optimisation for the host’s user interface, integration with local hardware and software resources as well as system performance issues; compared to software-maintenance and interlinking with service-based advertising as drawbacks.

Now Facebook have released an official client for the Apple iPad tablet computer. This client demonstrates the advantages of a client-side app for the iPad; with functionality like an always-visible presence list, proper response to the touch gestures, “to-the-edge” full-screen photo viewing as well as a multi-column view.

They have also answered a call from people who play FarmVille and similar games by offering the ability to play these games on the iPad using this platform’s Facebook client.

Of course time would tell when a port for this client is made available for the other popular tablet platforms like Android Honeycomb or Blackberry Playbook. But I often wonder whether Facebook will even issue a client application for the Windows or Macintosh desktop-computing platforms.

The tablet will be the center of the connected lifestyle — Online Video News

My comments

This article is affirming the idea of using a tablet computer like the Apple iPad or the Acer Iconia Tab in the lounge room as you watch TV. Some people may object to this because of the “too many screens” argument. But of course, you will still look at the big screen for the video content.

Small personal TV

One of the most common TV-related apps for the iPad and tablets of its ilk is as a personal screen for viewing content. This could be in the form of downloading or streaming the content to the tablet device and has been subjected to various legal strangleholds with Hollywood.

But it also has been taken further with broadcast-LAN tuner adaptors which tune in and stream TV content to these tablets once controlled via a special app. As well, the use of DLNA media player software can allow you to view video content held on your home network through these devices.

Remote control for large screen

Another application of interest is for the tablet to work as a remote control for the large-screen TV. Here, this would work with apps delivered by TV and set-top-box manufacturers to the various app stores for the tablet platforms.

It would work hand in glove with programming your PVR, use of interactive-TV applications or even using the interactive functions of a Blu-Ray disc; as well as navigating an increasing array of TV channels.

Of course, I have a doubt about this when it comes to activities where you need instant response. I would like to be sure that you tap MUTE on the tablet and you are sure that the racecaller voice that is part of that commercial isn’t heard the moment you press it for example.

As well some manufacturers may limit this function to their tablets, especially if the tablet is the same brand as the TV in question; usually as a way to reinforce brand loyalty.

Show downloaded content on large screen

In a similar way to the previous “small personal TV” application, a tablet computer can be used to show content on the large television or video projector. This can be through a direct connection from the tablet’s miniHDMI socket or AV-out jack to the TV or by pushing the content to an Apple TV or DLNA network media player.

But wait there’s more:

Internet browsing concurrent with TV viewing

A very common application that I have noticed with smartphones and tablets is to engage in Internet use while watching TV. Examples of this include researching a TV programme on IMDB or a concept that was used in the TV program; using the tablet as a persistent scoreboard during a sports game or updating the Social Web during a TV show. I have expanded on the “persistent scoreboard” application in this site by mentioning an increasing number of “scoreboard apps” that are available for most sports codes and leagues and the role of these apps in enjoying your favourite sports fixtures.

The persistent scoreboard could be an app in itself or simply an always-refreshed Web page; and could remind you of where the players stand in that match you are watching. In some cases, the apps provide access to player / team information as well as on-demand video replays or interactive progress maps. Of course, you could head over to other commentary sources for comments other than what the TV commentators are barking about.

As I have seen, a lot of TV shows are integrating the Social Web very tightly in to their programming fabric. This can be typified with selected Twitter and Facebook comments being read out by the compere or a ticker with Twitter comments crawling across the bottom of the screen. Even news and public-affairs events will have official or unofficial tickers running on Twitter or Facebook as people post up comments on these events using the Social Web.

The tablet computer may work better than the “smart TV” Social-Web apps because the TV usually works with one account at a time and you won’t see the show’s video occupying the screen as you post your comment. One or more tablets (or small computers) can perform this function in an individual manner for individual viewers,

Setup requirements

In most cases, a Wi-Fi connection to the home network and broadband connection is all that is needed if the tablet is just being used at home; and would be necessary for network-media-adaptor use. This could allow you to buy a Wi-Fi-only model if it is to stay primarily at home or not be used with an external wireless-broadband router on the road.

Conclusinon

As I have said, the tablet is now working as a supplementary screen in the TV lounge area rather than just as an ebook reader and email terminal.

BBC News – Mobile web users at the end of their tether

My comments

This article is pointing to a common practice amongst most US and European mobile-phone carriers concerning the tethering of mobile phones.

What is tethering?

This is where one uses a mobile phone as a wireless 3G modem for another computing device like a laptop computer or a tablet. It can be done wirelessly using a Bluetooth link or the phone operating as a wireless router when certain software is run. On the other hand, it can be done simply by connecting the phone to the PC using a USB cable and running a driver set on the PC.

Why tether than use a separate modem

Tethering has an advantage over using a separate modem to service a device’s data needs. Here, one doesn’t have to manage different data plans for each device – the mobile phone, the tablet computer or the laptop. Instead, they can work with a larger plan that is shared amongst all the devices.

Laptop users also benefit from tethering. This is because, unless they have a 3G-enabled laptop, they only need to think of one device i.e. the mobile phone rather than making sure they have a 3G USB or ExpressCard modem with them.

The common practice with mobile carriers

Most of the US phone carriers like AT&T or Verizon, as well as some of the European carriers treat the tethering as a distinct “wireless-modem” usage compared to using a phone for integrated Web browsing. Here, they insert premiums for this usage in to their tariff charts for this kind of usage and the US carriers even implement software to discourage tethering unless the user subscribes to a plan that specifically allows tethering.

My experience with Telstra

I have maintained a mobile phone service with Telstra since 1997, working through six subsidised-handset contracts over this period.

Last year, before I went to Sydney, I went to a Telstra store to ask about my data options with respect to my then-current phone contract, Here, I asked about whether I should tether my handset to my laptop or buy a 3G “stick” either as an extra service on my bill or as a prepaid service. They suggested that I consider tethering and increase my plan’s data allowance and I had paid for the extra data allowance.

Here, Telstra offered lower-allowance data plans as part of their mobile phone plans but allowed customers to “buy on” more data allowance. Here the tariff charts don’t discriminate between using your phone as a modem for another device and using the phone as its own Internet terminal. This is although they sell a range of 3G “sticks” and “MiFi” devices alongside the mobile phones.

I didn’t need to do anything to the phone to enable tethering and was able to be sure it worked on a “utility” laptop that I had and was intending to take to Sydney. This was before I was lent the Dell Inspiron 15r laptop which I reviewed as part of the trip. Here, I had made sure that the Inspiron had the necessary drivers for the phone before I had left.

Recent steps with some European carriers

Some European carriers have taken the same step that Telstra has been doing for the many years. That is to modify the tariff charts to remove the distinction between tethered (modem) and handset-specific data.

It is to cater for the reality that the same device uses the same bandwidth whether it is for its own use or another device’s use.

Tethering can benefit the carrier as well

Mobile-phone tethering provides a financial benefit for the carriers as well as a utility benefit for the users. Here, it allows the carrier to see increased per-service revenue. Typically this can be brought about by customers increasing their data allowances in the same way that I did – buying on extra data capacity to their plans where the tariff chart allows.

This is although most customers don’t “burn up” their call or data allowances that they pay for. Rather, if they anticipate extra use, they would increase the allowances. One reason is to allow the customers to budget for a predictable amount for their communications.

Tethering and the Internet-enabled car

When one starts to think of Internet-based infotainment like listening to Internet radio while driving or Internet-driven synchronous traffic-status updating for navigation systems, one would think of how they get the data to the vehicle.

I had touched on this previously in the article about Internet radio in the car and have mentioned that tethering a mobile phone to a vehicle’s infotainment system would be one of the pathis. Infact it may be a logical path as Bluetooth is used to facilitate handsfree calling in the vehicle.

Conclusion

What I would see is that tethering shouldn’t be treated different from phone-specific use and that users should be aware of this as an alternative to operating separate modems and accounts.

QR code used in a newspaper to link to its mobile site

A QR Codes is a two-dimensional monochrome barcode that is designed to house a long text string. This may represent contact details or Wi-Fi network parameters but is commonly used to provide a link to a Web-hosted resource. These barcodes may be printed on a newspaper, business card or flyer; or even shown on a Website; the latter method being used to show links to software for the Android platform.

Typically, a person who has a mobile phone equipped with a QR-code reader app can then just point the phone’s camera to the barcode and “take a picture” of that barcode. This then leads to the contact details being put in their contact list or the user being taken to the Web site or Web-hosted resource. This function has even been extended to supplying GPS coordinates to a device for navigation (think of geocaching) or, in the case of Android phones, supplying Wi-Fi service parameters to these phones as part of provisioning hotspot service.

A QR code as used on a poster to advertise this site

They are popular in Europe especially with cafes and restaurants but are slowing increasing in popularity in other countries. As well, some commentators have described the QR code as a way of providing a machine-readable hyperlink in the field. It is also worth having a look at various QR-code blogs like this one so you can know what the trend is about.

Infact, when I promote HomeNetworking01.info using posters or business cards, I make sure there is a QR code pointing to the site so that people can use their phones to head to the site.

Why QR codes for your organisation

One major benefit that QR codes have for your print-based campaigns is that you can insert a direct link to your Webpage or a resource on that Webpage. Your audience then can visit that resource without having to memorise a URL or transcribe the URL in to the phone using a small touchscreen keyboard or SMS-style with the phone keypad.

The QR code is better than using Bluetooth transmitters to provide content. This is because the user isn’t likely to be annoyed with “accept this” Bluetooth responses from these transmitters when they come in to range of the transmitters. As well, the user doesn’t have to remember how to enable or disable Bluetooth discovery mode on their device. As well you don’t need to make sure there is a transmitter at the advertisement and make sure there is power to the transmitter, which can make the QR code acceptable even for posters on that noticeboard or shop door.

It is also better than using any of the proposed “near-field communication” technology for linking to Web resources because you don’t need to buy and integrate near-field transmitters in your promotional materials for the technology to work.

Direct Link to deep Web resources

You may want to provide a sound clip, video or PDF file to your mobile users. As well, you may want to link the user to a particular Web page about a product or promotion. But mobile users may find these resources difficult to gain access to on your site because of being required to enter a long URL into that numeric or small alphabetic keypad.

The QR code can provide the direct link to your campaign page, PDF file or audiovisual resource in a manner that is ready to download “there and then”. If the resource is a YouTube video, you can provide the link to the video clip as it appears on YouTube and the site or local YouTube client can open when the QR code is scanned.

Appropriate for the Social Web

Here, the QR code can augment your Social Web campaign because most active Social-Web users tend to work their Facebook or Twitter presence more from their smartphones. This is especially as I have noticed a lot of small businesses promote their Facebook presence online through posters and flyers that have the “Like us on Facebook” slogan.

What a simplified way of doing this by pointing the latest ultra-cool iPhone to the QR code on the poster attached to the trendy cafe’s espresso machine or refrigerated display cabinet in order to “like” that cafe on Facebook. It certainly makes it certain that you are seen with that iPhone.

Reading QR Codes

Some mobile-phone carriers and manufacturers will supply a QR-code reader with their Internet-enabled camera phones. But iPhone, Android, Blackberry and Windows Phone 7 users can come across many free QR-code readers at their platform’s app store. One example that comes to mind is the free i-Nigma which started becoming available for the iOS platform but lately became available for the Android and Blackberry platform. There are others like Barcode Scanner for the Android platform, BeeTag for the Blackberry platform and ScanLife for most of the platforms.

A main difference that may sort the “sheep from the goats” as far as QR-code reader programs go is whether they can read a light-coloured QR code that is printed on a dark surface. Similarly, there may be differences in how well a difficult-to-read code like a double-sided sign that is backlit can be understood.

At the moment, most QR-code readers are pitched at handheld mobile phones for immediate viewing of the resources on these devices. But it could be feasible to provide “capture-store-sync” transfer of Web URLs or downloaded resources to desktop operating systems or tablet computers as a feature of a QR-code reader. This could then allow a person to view the Web site on their laptop computer using their favourite Web browser at a later time.  It would also be of importance with QR codes being used for presenting Wi-Fi network parameters to Android phones, where the same parameters can be passed up to a laptop and integrated in to the Wi-Fi networks list for that computer.

Preparing QR codes

There are many QR-code generator sites and programs, most of which are free to use. Typically these sites may allow you to provide a URL to a resource as the input text or prepare contact details. A good resource to start from is this blog’s list of the top 10 free QR-code generating sites. As well, i-Nigma also offer a free QR-code generating page as well as their QR-code reader. Yet another resource is the QReateBUZZ Webpage which I have used for the QR codes for promoting this site.

These codes can be yielded as a small, medium or large size. Here, you could use a small size code for business cards and flyers here you don’t have much room or just want a discreet code on the corner of the poster. You could then use the larger sizes if you want people to notice that there is a QR code in the signage’s artwork or need to be far from the artwork to scan it.

Most sites will yield high-resolution PNG or JPEG bitmaps but some may yield EPS Postscript files or PDFs that are vector-images of the QR codes. You typically will then copy-and-paste or import the mage in to your artwork. As well, a lot of the sites will generate a JPEG image that you copy from the site using Ctrl-C / Command-C and paste to your artwork using Ctrl-V / Command-V.

Of course, there are some desktop QR-code generator programs which will run on a regular computer but most of these are Windows-only and a lot of them are offered at “large-business” prices.

It is still good practice to work with dark-graphics-against-light codes because most QR-code readers cannot work effectively with light-graphics-against-dark at the moment. If you are setting a QR code on a dark background, you could use the dark graphic on a light background and have a distinct light-background margin around that barcode.

Conclusion

Once you explore the creation and use of QR codes as part of your online and offline marketing strategy especially where you have online resources

I am reviewing the Acer Iconia Tab A500 Series 10” Android tablet computer. It, like most other Android-based 10” tablets, is faced off as a competitor to the Apple iPad tablet which is of the same size.

It is infact the first Android-based consumer/small-business tablet computer that I have reviewed for HomeNetworking01.info

The unit itself

Aesthetics and build quality

The Acer Iconia has a metal-feel about it which makes you think of a durable tablet computer. It is light in your hands but some people may find the smooth finish very slippery when they handle it.

Display

The Iconia’s display is as readable as most tablet computers go especially when you are using it for reading content. When you use the Android-provided touchscreen keyboard, you may not find the text entry procedure comfortable for long periods of content creation. As far as the display’s brightness is concerned, the Iconia Tab A500 is still bright enough for most users even if it runs on the energy-saving “dim mode”.

Of course, for video, the display had worked smoothly when handling YouTube and similar video playback applications

Audio

Left Hand Side - Power switch, headphone jack, miniHDMI jack

Like most tablet computers, the Acer Iconia’s sound doesn’t have much in the way of volume output if you use the integrated speakers. Here, they would be good enough for audio prompts and the like.It was still clear for the basic local listening and you have the distinct stereo separation but I would recommend use of headphones or external speakers like Bluetooth A2DB audio setups.

Connectivity and Expandability

Right hand side - Power input, microUSB port and USB host port

All the units of the Iconia A500 Series have 2 regular USB device ports as well as a micro USB port for connection to a host computer. They all support Bluetooth connectivity for standard profiles as covered by Android. This includes the ability to do Bluetooth object-push file transfer as well as audio streaming with Bluetooth headsets and audio setups.

You can connect these devices to an HDTV using an miniHDMI-to-HDMI cable if you need the large TV screen.

Another USB port on this device - at the bottom of the unit, under the screen.

These Acer tablets have a feature that is common with most Android smartphones and tablets in that they have a microSDHC card slot. This means that you can expand on the storage that you initially bought or swap media collections around on different microSD cards as if you were working with cassettes or MiniDiscs.

The power connection is a 12 volt connection, which may make it easier to use the Iconia Tab in a car through the use of a cigar-lighter cord. This comes in handy when you load devices like the Iconia with movies or ebooks to be viewed by passengers on a long journey.

Performance

The Acer Iconia is very spritely when it comes to performance. For example, it was able to play sound from a DLNA network media server while I did some Web browsing without the sound deteriorating. It could also perform properly with YouTube even if you put the videos on full screen.

The battery can run for a few days of adhoc but regular mixed-activity use without charging. I haven’t yet worked out an activity plan to “stress-test” these devices for battery runtime.

Other factors

The Acer Iconia Tab A500 Series is equipped with two cameras, one of them being a front-facing one for videoconferencing. This would work well if Skype provided full videophone functionality across entire line of Android HoneyComb tablets.

Limitations and Points Of Improvement

One point of improvement that could come in handy would be to deliver Skype as part of the standard software mix for all of the models. As well, the Acre iconia, like most tablets could benefit from a detachable kickstand that comes as part fo the package. This could appeal to users who use a USB keyboard for typing up notes or those of us who push these units in to service as an Internet terminal / digital picture frame for the kitchen.

Conclusion

I would consider this Android tablet as a “floater” tablet computer as a multifunction general-purpose tablet computer where you value the large screen size and snappy performance. This is more so if you want a tablet computer that isn’t confined to Apple’s dream and you know what you are after for software.

The Wi-Fi-only units can be useful if you want to manage just one mobile broadband package by using your smartphone’s Wi-Fi tethering options to connect to broadband service on the go. You may go for the wireless-broadband-equipped units if you don’t mind running a separate wireless-broadband account and allowance for these devices.

Apple v Samsung just the tip of the iceberg

My Comments

What the Apple v Samsung court case that is being litigated around many countries in the world is about is the attempt by manufacturers to patent the style or operation interface for classes of manufactured goods, i.e. tablet computers and smartphones.

A manufacturer may work out the style for a particular class of manufactured goods or determine a user interface that is going to be the way this class of goods will be operated. But do they need to patent this style or user interface and chase down to sue other manufacturers who implement this user interface or style.

Established design practices that I have observed

In the case of how manufactured goods are styled, I have seen a large number of device classes that have a very common style and user-interface in place. Take for example, Henry Ford who determined the layout and role of the pedals in a car with the clutch on the left, brake in the centre and accelerator (gas pedal) on the right. This was gradually implemented by other vehicle builders in the early days of the car and became the standard for foot control in the car. Here, you didn’t need to relearn vehicle-control skills and practices just to suit particular manufacturers’ vehicles. For a tablet computer, the multi-touch operating procedures like the “pinch-to-zoom” procedure are really about achieving a consistent user interface. For Apple to patent the multi-touch interface is utter nonsense.

Similarly, there have been devices that used the same or similar industrial design, usually with a few variations. A common example are the interlocking rim deadbolts used in the USA and Australia. A lot of these units have a very common styling, with the turn-knob being the only part that differs between manufacturers in most cases. There have also been the earlier “IBM clone” computers with a system box and monitor styled like the original IBM equipment. In one example the “clone” monitor had a third “on-off” knob as well as the brightness and contrast knobs that were part of IBM’s design. Of course the monitor had the same fascia as the IBM design.

I often find that the use of common designs or user interfaces can work to gain increased acceptance of the device class, while the manufacturers take tome to work on a unique industrial design or different features.

The Samsung Galaxy S smartphone – is it the same as the iPhone 3GS?

I don’t see the Samsung Galaxy S smartphone, which I own, as being a copy of the Apple iPhone 3GS. The differences that I would notice include the installation of the headphone and microUSB jacks on the top edge of the phone, a removeable back to gain access to the microSD card, USIM card and battery as well as two extra touch-buttons at the bottom of the screen that are part of the Android user interface.

A person may think that this phone is an iPhone clone due to the use of the black bezel around the display, a hardware “home” button and a faux-chrome strip around the phone’s edge. This would be more so when the phone is in a hibernation state. Similarly, a “swipe to unlock” user interface which may use different prompt graphics to Apple’s “slide-switch” graphic may still be considered as mimicking Apple’s user interface.

Ramifications of this legal battle

I would suspect that if Apple wins the legal battle on user-interface grounds, it could affect all touchscreen computing applications, whether with a smartphone, tablet computer or even touchscreen implementations in regular computing devices. This could even go as far as Microsoft’s touchscreen computing table or dynamic whiteboards that allow touch interactivity.

It may also affect the abovementioned design practice associated with implementing similar industrial designs in most manufactured goods or the user interface in computer software. It would be more so with the positioning or styling of visual cues in these designs and can even affect how buildings or interiors are styled in case they cross over a brand’s territory.

Conclusion

This issue of using patents to protect the style or user-interface of a manufactured device or computer program shouldn’t be used to stifle the creation of competitive devices and the exploitation of the technology. The concept of patents should be more about providing a way of exploiting the protected technology in a competitive manner but with proper attribution.

When I talk of a client-side application, I am thinking of an application that is written for and runs on the client device’s operating system and interacts with the Web-based social network service through known application-programming interfaces. This is in contrast to the Web-based interface that requires interaction through the client Web browser.

Of course, other people have developed client-side applications for these social networks either as an improvement for existing software projects or as their own projects themselves. These are usually considered third-party applications by the social-network provider and may not support all functions that are being baked in to the social network as it evolves.

The issue here

It may be easy to think that you don’t have to provide these client-side applications for desktop operating systems (Windows, MacOS and Linux) and tablet computers. This is because these devices can typically allow the user to competently navigate the Web-based user interface for the typical social-network service. It is compared to the smartphone having different user-interface needs that are drawn about by the use of a physically smaller screen on these devices.

Drawcards and Benefits

A major drawcard behind the social-network client application for larger-screen devices would be high integration with the device’s operating system and other applications. The benefits of this would be obvious, such as linking the “friends / followers / connections” databases held by the social-network services to local contacts databases maintained by your personal-information-management software or exhibiting of photos and videos from these services full-screen without the chrome associated with Web browser interaction.

Other benefits would include use of the operating system’s notification abilities to “pop up” messages related to these services such as direct messages or friend requests. Even the chat functionality that is part of services like Facebook would benefit from an “instant-messaging” user experience of the likes of Windows Live Messenger and Skype. This is an always-available presence list and application-created chat windows for each conversation. There is also the benefit of direct access to connected devices like printers or cameras.

Of course, there would be the computer-performance benefit of not needing to maintain a Web-browser session for each social-networking session. This is because the applications can be pared down to what is needed for the operating system; and can also be of benefit to those of us who use battery-operated devices like tablets or notebook computers.

For tablets, the user interface could be highly optimised for touch-based navigation and could make best use of the screen area of these devices. This is more so with this class of device being available in two major sizes – a 7” size for something that can stuff in your coat pocket or the larger 10” size. As well, it could include “right-sizing” the interface for the on-screen keyboard when the user needs to enter information to the service, such as through the log-on experience.

Drawbacks

The drawbacks to this will typically include another client application to develop and maintain for the service, which may cost further money for the service provider. It also includes evolving the application to newer versions of the operating system and incorporating the new features that are available through the operating system’s lifecycle.

As well, there will be the factor that the ad-supported Web interface may become more irrelevant and these applications may them limit access to the cash-cow that these services have to make money – users viewing those ads that are on that interface. This is because most users would be reluctant to load ad-supported software on their desktop computers due to system-performance and privacy issues that have been brought about by highly-intrusive adware.

Conclusion

It may therefore be worth the social networks considering the idea of developing client-side applications for desktop and tablet operating environments. This is in order to provide the user-experience improvements that such applications can provide for this class of usage.

Some of you may already have public Wi-Fi Internet service in place thanks to either a neighbouring business that you are friendly with or a “hotzone” run by the local government or a private entity.

The usual mitigating factors that affect the use of a public Wi-Fi hotspot in that cafe or bar may include the size and layout of the public areas. A small cafe may put off that idea due to a small public dining area with lots of furniture. Similarly the location of the premises to regular public transport (regular rail, tram / light-rail or regular bus service) may affect its worth for this feature due to the fact that the commuters would use this facility to do email updates before they head on their journey.

One cafe owner who has a hotspot may notice that there may be more reliance on certain traffic types and drivers to cause more patronage and make the use of a hotspot worthwhile. He cited the existence of apartment blocks as being a key driver due to the residents seeing the cafe as a “second lounge room” due to the typical flat (apartment) having a very small lounge area. Another driver would be tertiary education or small offices operating nearby, where the cafe serves as the “second office”. This would include people who work from their homes and use these places for their meetings.

Factors that may be of concern:

The space and layout of the public area can be a key factor. A wireless hotspot may work against smaller premises where there is a lot of furniture in the public area. This is because of the fact that there is an increased likelihood of personal luggage like laptop bags or briefcases ending up in the thoroughfares.

Another factor is the prevalence of smaller living or working premises near the location. Here, this could support the provision of a hotspot due to the cafe or bar being seen as a “second lounge room” or “second office” because of the size of the living or working area in the customers’ own areas. This may be already factored in to your business’s direction especially as development takes place in the neighbourhood concerning these kind of premises or as a significant employer sets up shop nearby.

Yet another factor that affect your idea of implementing or maintaining a public wireless Internet service would be the proximity of the premises to regular public transport. This may be based on a tram or regular full-time bus service passing your door or a rail station for a commuter-rail or mass-transit service being a few minutes walk from your door.

As well, you may also factor in the kind and frequency of your traffic. This may include whether you have your traffic arriving mainly through weekdays or weekends.

On the other hand, some cafe and bar operators may find that a Wi-Fi hotspot may attract “nuisance technology traffic” who may affect the mood of the cafe or bar. This traffic may manifest in the form of people playing games with loud sound-effects, teenagers or young people playing YouTube videos or latest downloaded music with the sound turned up loud, or customers using their laptops for long videoconferencing sessions. It may also attract “mooching” where customers exist in the premises for a long time, using the facilities but without ordering any food or drink or infrequently ordering low-value food and drink.

Surveying your traffic

It may be worth observing the kind of traffic you have before committing to a public Wi-Fi service so you can have best use. One way would be to observe and count particular traffic types through a sample period of a month or two months. Here you would notice the number of traffic that fits certain types as well as the value of the spend caused by that traffic through their stay.

Traffic types:

There are two different technology-user traffic types to look for when assessing the volume of traffic that uses technology.

Business traffic

These are people who are using your premises to do business. Typically they are equipped with a briefcase or similar case and will use a laptop computer. They may also be equipped with various business documents, paper notebooks or similar items.

This traffic will end up in two sub-classes – one where there is a meeting between two or more people; and another where the person works alone at the table or bench, going through notes or typing / writing up the material. The latter person may come about after a meeting where one of the participants want to “do their homework” from that meeting away from the office.

Leisure portable computer users

These people use the portable-computer technology for personal use at your premises. This will typically be in the form of email, Social Web (Twitter, Facebook, etc), games (Angry Birds, etc), researching leisure-activity information (movies, concerts, etc), videoconferencing (Skype) or personal video viewing (YouTube, etc).

They may typically be younger users who may be alone or with a group of friends and be clutching on to consumer notebooks or tablet computers like the iPad.

What to factor in

When you plan for a hotspot or want to attract “technology-equipped” traffic, there are certain issues worth considering

One factor would be the premises capacity. This encompasses the seating capacity and layout in both indoor and outdoor areas. Here, technology users will come in with briefcases or other luggage that houses their technology and this can get in the way of the traffic flow. Similarly, the premises needs to have proper access to restrooms which can allow for increased traffic.

It may also be worth investigating additional power connections in the public area such as spare power outlets so that clients can charge their technology devices or run the devices on AC while at the premises. This may also involve using high-capacity powerboards when connecting lights or appliances to power outlets in the public area and anchoring these powerboards to the wall using their keyhole sockets.

Of course, it is worth finding out from your regular clients about how they would accept this traffic that would be caused by the proposed hotspot. Of course some of the regular clients may be portable-technology users themselves and may want to benefit from this kind of access themselves.

Conclusion

This article may be of interest and use to cafe or bar owners who are thinking or have thought about the public Wi-Fi Internet service as part of the service mix for the business. It does explain what issues may be of concern as part of providing the service and whether the service may be right for the business.

Please feel free to leave comments after this article about your experience with planning for, setting up or operating public Wi-Fi internet service in your cafe or bar. If you are reading this in the HomeNetworking01.info Facebook Page, you can leave comments on that page after the article. As well, please lave the name of your cafe or bar in the comments that you leave and / or provide a Web link to your establishment’s homepage in the Web link field so I can see it is from the establishment who has the insight.